Uniden SDS200 English Owner Manual - Page 13

Close Call ® RF Capture Technology - Lets you set the scanner so it detects and provides information about nearby radio transmissions. Close Call Do-not-Disturb checks for Close Call activity in between channel reception so active channels are not interrupted. Broadcast Screen - Allows the scanner to ignore search and Close Call hits on known broadcast frequencies including pager frequencies. You can also program up to 10 custom frequency ranges that the scanner ignores. Fire Tone-Out Standby/Tone Search - Lets you set the scanner to alert you if a two-tone sequential page is transmitted. You can set up to 32 Tone-Outs. The scanner will also search and display unknown tones. PC Programming - Use the Sentinel software to manage your scanner's Profiles, Favorites Lists, Databases, and firmware updates. Priority/Priority w/DND Scan - priority channels let you keep track of activity on your most important channels while monitoring other channels for transmissions. Priority ID Scan - Allows you to set priority to talkgroup IDs. Intermediate Frequency Exchange - Changes the IF used for a selected channel/frequency to help avoid image and other mixer-product interference on a frequency. Individual Channel Volume Offset - Allows you to adjust the volume offset for each channel. Configurable Band Defaults - Allows you to set the step (5, 6.25, 7.5, 8.33, 10, 12.5,15, 20, 25, 50 or 100 kHz) and modulation (AM, FM, NFM, WFM, or FMB) for 31 different bands. Repeater Find - Allows the scanner to try to switch to the repeater frequency if an input frequency is found. Adjustable Scan/Search Delay/Resume - Set a delay up to 30 seconds or a forced resume up to 10 seconds for each channel or search. Data Naming - Allows you to name each Favorites List, System, Site, Department, Channel, ID, Location, Custom Search, and SAME group, using up to 64 characters. Duplicate Input Alert - Alerts you if you try to enter a name or frequency already stored. Quick Keys - You can assign up to 100 Quick Keys to your Favorites Lists, Systems, Departments, and Sites. Search Avoids - You can temporarily Avoid up to 250 frequencies and permanently Avoid up to 250 frequencies in any Search mode or Close Call mode. 10 Custom Searches - Lets you program up to 10 custom search ranges. Search with Scan Operation - Lets you include Custom Search ranges during scan operation. 3 Search Keys - You can assign 3 of the number keys to start a Custom Search, Tone-Out Search, or Close Call Search. Quick Search - Allows you to start searching at the displayed frequency or enter a frequency and start searching. SAME Weather Alert/Priority - Lets your scanner alert you when a SAME alert is transmitted on a NOAA weather channel. You can also set a weather channel as a priority channel. 7