Uniden SDS200 English Owner Manual - Page 47

OPTION Set Attenuator Set Avoid Set Location Information Delete Site New Site DESCRIPTION Set whether attenuation is applied for the site. Set the avoid status for the site. Select whether to use a circle or rectangles to define the site location, then enter the appropriate parameters to define the site location. Delete the site from the system. Create a new site for the system. Applicable Systems PMNDEL PMNDEL PMNDEL PMNDEL PMNDEL Edit Department - Create/Edit departments which hold the channels scanned on the system. Select a department or select New Department and set a name for the department. Then, see the following table for department options. Setting Description Applicable Systems Edit Name Edit the name displayed when the department is scanned. PMNDELC Set Department Quick Key Set/change the quick key used for the department PMNDELC Edit Channel Enter the TGIDs or Frequencies for the department. See Channel Options, below PMNDELC Set Location Information Select whether to use a circle or rectangles to define the department location, then enter the appropriate parameters to define the department location. PMNDELC Set Avoid Set/change the avoid status for the PMNDELC department Delete Department Delete the department and all its channels PMNDELC New Department Create a new department PMNDELC Channel Options After you enter the Talk Group ID (for trunked systems) or frequency (for conventional systems, the following channel options are available. SETTING Set Name Edit TGID Set TDMA Slot DESCRIPTION Assign a name that is displayed for the channel while scanning Edit the talk group ID set for the channel Set the slot used by the channel. APPLICABLE SYSTEMS PMDNELC PMDNEL D 41