Yamaha 01V96i Owner's Manual - Page 11
Monitor Out & Headphones, Channel Strip STEREO Control Surface
![]() |
View all Yamaha 01V96i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Control Surface & Rear Panel Control Surface 11 Monitor Out & Headphones Section 1 2 3 CH5-8 CH9-12 PHANTOM +48V L R IN OUT 2TR -10dBV (UNBAL) PHONES MONITOR 2TR IN 0 LEVEL10 MONITOR OUT 0 LEVEL10 PHONES 5 4 1 2TR IN/OUT connectors These unbalanced RCA phono connectors input and output line-level signals, and are typically used to connect an external recorder. When the AD15/16 selector in the AD Input sec- tion (8) is turned on (pushed in), the signals input at the 2TR IN connectors are routed to AD Input Channels 15 and 16. When the Monitor Source selector (2) is turned on (pushed in), you can monitor the 2TR IN signals from the MONITOR OUT connectors. The 2TR OUT signals are always the same as the STEREO OUT signals. 2 Monitor Source selector This button selects the signals output from the MONITOR OUT connectors on the rear panel. When this button is turned on (pushed in), you can monitor the signals input from the 2TR IN connectors. When the button is turned off (raised), you can monitor the Stereo Out signals or soloed channel signals. 3 MONITOR LEVEL control This control adjusts the monitoring level of the signals output from the MONITOR OUT connectors. 4 PHONES LEVEL control This control sets the level of the PHONES. 5 PHONES jack You can connect a set of stereo headphones to this stereo phone jack. The signals output from the MONITOR OUT connectors are also output from this jack. Channel Strip Section 1 [SEL] buttons These buttons enable you to 1 select desired channels. The 2 [SEL] button indicator for the currently-selected channel lights 3 up. The channel selected by each [SEL] button depends on the layer selected in the LAYER sec- tion (see page 13). These buttons also allow you to create or cancel channel pairs, and add channels to (or remove them from) Fader, Mute, EQ, and Compressor groups. SEL SOLO ON 1 +10 0 5 5 0 10 5 15 10 20 2 [SOLO] buttons These buttons solo the selected channels. The [SOLO] button indicator of the currently-soloed channel lights up. 4 15 30 20 40 30 50 40 60 70 50 3 [ON] buttons 1 17 AUX 1 These buttons turn the selected channels on or off. The [ON] button indicators for On chan- nels light up. 4 Channel faders Depending on the button selected in the FADER MODE section (see page 12), these faders adjust the selected channel input levels or the Bus Out or Aux Out levels. STEREO Section 1 [SEL] button Selects the Stereo Out. 2 [ON] button Turns the Stereo Out on or off. 3 [STEREO] fader This 100mm motorized fader adjusts the final output level of the Stereo Out. 1 SEL 2 ON 0 5 10 15 20 30 40 50 60 70 3 STEREO 01V96i-Owner's Manual
![](/manual_guide/products/yamaha-01v96i-owners-manual-5217b5b/11.png)