Yamaha 01V96i Owner's Manual - Page 48
Initializing, ON/OFF switch. - factory reset
![]() |
View all Yamaha 01V96i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
48 Tutorial 3 PASSWORD This button enables you to change the current password. Move the cursor to the PASSWORD button, then press [ENTER]. The Set Password window appears, enabling you to change the password. Enter the current password in the PASSWORD field, and a new password in the NEW PASSWORD field. The factory default password is "1234." Enter the new password again in the REENTRY field located below the NEW PASSWORD field. Move the cursor to the OK button, then press [ENTER] to change the password. Tip: To clear the registered password, move the cursor to the CLEAR button, then press [ENTER]. If you've forgotten the password you specified, you can clear the password by initializing the 01V96i to its factory-set state. Initializing You can delete all currently-recorded settings and restore the factory-preset values, and reset the Operation Lock password to its initial setting. Follow the steps below. Note: • If you initialize the 01V96i to the factory-preset values, all Scene, library and other data you stored previously will be erased. Proceed with caution. • If you want to keep the current internal data, be sure to first back up the data using the Studio Manager software. 1. Make sure that the power to the 01V96i is turned off. 2. While holding down the SCENE MEM- ORY [STORE] button, turn on the POWER ON/OFF switch. After a moment, the 01V96i displays the following confirmation window. 3. To reset the 01V96i to factory default set- tings, move the cursor to the INITIALIZE button, then press [ENTER]. To cancel the initialization operation, move the cursor to the CANCEL button, then press [ENTER]. When the internal data is thoroughly overwritten, the 01V96i restarts using the factory settings. 4. To reset the Operation Lock password to its initial setting, in Step 2, move the cursor to the PASSWORD button, then press [ENTER]. The password is reset to "1234." If you do not take any action after the confirmation window appears, the window automatically closes and the 01V96i restarts without being initialized. 01V96i-Owner's Manual
![](/manual_guide/products/yamaha-01v96i-owners-manual-5217b5b/48.png)