Yamaha PM5000 Owner's Manual - Page 22
VCA Group Assignment Procedure, ASSIGN MODE.
View all Yamaha PM5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Input Channel Section VCA Group Assignment Procedure 1 Press the ASSIGN MODE [VCA] key to initiate the assignment procedure (the indicator will flash). 2 Engage a VCA master [CUE] switch to specify the VCA master to which a channel or multiple channels are to be assigned. The [CUE] switch will flash. If any input channels are already assigned to the selected VCA master, their corresponding VCA indicators will flash. 3 Engage the [CUE] switches of the input channels to be assigned to the selected VCA master (the corresponding VCA indicators will flash). To undo an assignment simply press the channel [CUE] switch a second time (the VCA indicator will go out). VCA Fader Channel Fader VCA 1 1 2 3 4 5 6 7 4 Repeat step 3 for all input channels to be assigned to the selected VCA master. 5 If a different VCA master [CUE] switch is pressed at this point the target VCA master will change accordingly and new channel assignments can be made. All channel assignments to the previously-selected VCA master will be confirmed and their corresponding VCA indicators will light. 6 Channel assignments can now be made to the newly-selected VCA master. VCA Fader Channel Fader VCA 1 VCA 2 1 2 3 4 5 6 7 7 Press the ASSIGN MODE [VCA] key to end the assignment procedure (its indicator will go out). Pressing any other ASSIGN MODE key will also end the VCA assignment procedure - assignment will switch to the newly-selected ASSIGN MODE. NOTE Normal [CUE] switch operation is suspended during the assignment procedure but the current cue settings are retained. 22