Yamaha PM5000 Owner's Manual - Page 72
Fader Mode Parameter No. U18, Automation Parameter No. U19
View all Yamaha PM5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Digital Control Section Fader Mode (Parameter No. U18) Normally the console's motor fader system will physically move the faders to recalled settings when a scene recall or preview operation occurs. This function makes it possible to defeat the motor-drive system so that the faders do not move when scenes are changed (the faders levels do change internally). Automation (Parameter No. U19) This function can be used to turn the PM5000's scene memory off. When the scene memory function is turned off all recall, preview, motor fader, safe switch, MIDI, and GPI functions are also disabled so that the PM5000 functions like a tradition analog console. FADER MODE Press [ENTER] after selecting the above display and a display like the one shown below will appear. Use the [INC] and [DEC] keys to select ON (motor faders ON) or OFF (motor faders OFF). MOTOR:ON NOTE When the motor faders are turned off level changes will result in a mismatch between the internal fader levels and the physical fader positions. This situation is indicated by a flashing [FADER SAFE] switch. If you want to match the fader's position with the internal level either press the [FADER SAFE] switch or move the fader slightly. In either case the motor drive for that fader will be temporarily engaged and the fader's position will be adjusted to match the internal level (after this has been done the [FADER SAFE] switch will stop flashing and will either light or go out according to the current fader-safe status). NOTE When the console is turned on the faders will initially move to match the internally set levels even if the fader mode function is OFF. AUTOMATION Press [ENTER] after selecting the above display and a display like the one shown below will appear. Use the [INC] and [DEC] keys to select ON (scene memory ON) or OFF (scene memory OFF). AUTO:OFF NOTE "AUTOMODE OFF" will appear on the parameter display while the scene memory is turned off. Even when the scene memory is disabled the channel [RECALL SAFE] switches can be used for mute safe operation (page 66). 70