Yamaha PM5000 Owner's Manual - Page 61
Date/Time Parameter No. U02, CompactFlash Memory Parameter No. U03
![]() |
View all Yamaha PM5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Date/Time (Parameter No. U02) This is the date and time maintained by the PM5000's internal clock. The date and time parameters are used to time-stamp scene memory and other data saved to external CompactFlash memory cards. Digital Control Section CompactFlash Memory (Parameter No. U03) This function allows internal scene and setup memory data to be saved to and loaded from external CompactFlash memory cards. A memory card formatting function is also provided. DATE/TIME 1 Press [ENTER] after selecting the above display and the year, month, and day values will appear on the parameter display while "DT" (date) flashes. At this point you could use the [INC] and [DEC] keys to select "TM" (time) for editing rather than the date, but the date parameters will appear first since they are usually edited first. D T 2 0 0 3 / 0 6 / 1 0 2 Press the [ENTER] key and the year value will flash. The flashing value can be edited by using the [INC] and [DEC] keys. When a value has been edited as required press [ENTER] to confirm the entry and move on to the next value. D T 2 0 0 3 / 0 6 / 1 0 3 Once the day (rightmost) value has been edited and the [ENTER] key pressed, the date is confirmed and "DT" will flash again. Press the [INC] or [DEC] key and the display will change to the time parameters: hour, minutes, and seconds. The leftmost "hours" value will be flashing and ready for editing. In the same way as in the date display, edit each value as necessary and press [ENTER] to move on to the next value. When the final "seconds" value has been edited and the [ENTER] pressed the time entry is confirmed and complete. TM 15:45:32 CF MEMORY NOTE New CompactFlash memory cards must be formatted before use. CompactFlash memory cards are formatted in accordance with DOS (FAT16) format, and files are handled in CSV format. Data saved to memory cards can then be loaded into a personal computer via a card reader or similar device, and the data can then be edited in a standard spreadsheet application (file names comply with the DOS standard: 8 characters plus the ".CSV" extension). 1 Press [ENTER] after selecting the above display and one of the displays shown below will appear. Select LOD (load), SAV (save), DEL (delete), or FMT (format), as necessary, and press the [ENTER] key. LOD:YAMAHA01 SAV:ALL DEL:YAMAHA01 FMT:FORMAT NOTE When the load or delete functions are selected the name of the CSV file on the card will appear on the display (the ".CSV" extension will not be shown). NOTE If a memory card is not inserted, the parameter display will not change even when you press [ENTER]. NOTE If the backup battery runs out the date and time will be reset to 2001/1/1, 0:00:00, and will begin keeping time from that value. 59
![](/manual_guide/products/yamaha-pm5000-owners-manual-99a07ba/61.png)