Yamaha PM5000 Owner's Manual - Page 63
Data Delete, Lock Mode Parameter No. U04, Use the [INC] and [DEC] keys to select either ON or
![]() |
View all Yamaha PM5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
4 Press the alpha-numeric [1] key to begin loading the file, or [3] to abort the operation. Never remove a memory card from the card slot during a load operation. The following display will appear while the data is being loaded. Executing ● Data Delete 2 After selecting DEL and pressing [ENTER] in step 1, above, you will need to select the data file you want to delete from the memory card. DEL:OLD_DATA 3 When you have selected the file to be deleted press the [ENTER] key. The following confirmation message will appear. SURE?Y:1 N:3 4 Press the alpha-numeric [1] key to begin deleting the file, or [3] to abort the operation. Never remove a memory card from the card slot during a delete operation. The following display will appear while the data is being deleted. Executing Digital Control Section Lock Mode (Parameter No. U04) This function can be an assurance when you have to leave the console unattended during breaks, for example. It locks the panel switch and channel fader settings so they can't be changed. Panel settings that are not savable to the scene memory such as the channel rotary controls, EQ [ON] switch, HPF [ON] switch, etc., cannot be locked. LOCK MODE 1 Press [ENTER] after selecting the above display and one of the displays shown below will appear: either ON or OFF with flash on the parameter display LOCK:ON LOCK:OFF 2 Use the [INC] and [DEC] keys to select either ON or OFF. 3 Press the [ENTER] key and the following confirmation message will appear. Press the alphanumeric [1] key to confirm your selection, or [3] to abort the operation. SURE?1:Y 3:N When the lock mode is turned on, the [UTILITY] switch will be disengaged and "LOCK" will appear on the message display. In this state the system is locked and the only operation that can be performed is to engage the [UTLILITY] switch and repeat the above procedure to turn the lock mode off and restore normal operation. NOTE Even while the lock mode is active scene recall operations can be carried out from an external device. If fader and other settings are changed while the lock mode is active the pre-lock settings will be restored as soon as the lock mode is disengaged. 61
![](/manual_guide/products/yamaha-pm5000-owners-manual-99a07ba/63.png)