Yamaha PM5000 Owner's Manual - Page 84

MIDI Echo Back Parameter No. 27, Program Change Echo, Control Change Echo

Get Yamaha PM5000 PDF manuals and user guides View all Yamaha PM5000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 84 highlights

Digital Control Section NOTE The transmit and receive channels are not used for control change transmission and reception (page 79). Since they are used for NRPN and scene number INC/DEC transmission and reception, it is necessary to set the transmit and receive channels of the external MIDI device to match those of the PM5000. 2 Use the [INC] and [DEC] keys to set the selected parameter as required. 3 Set the other functions as required. MIDI Echo Back (Parameter No. 27) Independently determines whether program change and control change commands internally generated by the PM5000 will be mixed with program change and control change messages received at the MIDI IN connector and transmitted via the MIDI OUT connector. MIDI ECHO 1 Press [ENTER] after selecting the above display and a display like the one shown below will appear. Use the [INC] and [DEC] keys to select the required setting, then press the [ENTER] key. Program Change Echo PGM ECHO:OFF Control Change Echo CTL ECHO:OFF 2 Use the [INC] and [DEC] keys to turn the selected parameter ON (echo enabled) or OFF (echo disabled). PGM ECHO:ON 3 Set other MIDI functions as required. 82

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
82
Digital Control Section
2
Use the [INC] and [DEC] keys to set the selected
parameter as required.
3
Set the other functions as required.
MIDI Echo Back (Parameter No. 27)
Independently determines whether program change and
control change commands internally generated by the
PM5000 will be mixed with program change and control
change messages received at the MIDI IN connector and
transmitted via the MIDI OUT connector.
1
Press [ENTER] after selecting the above display and
a display like the one shown below will appear. Use
the [INC] and [DEC] keys to select the required
setting, then press the [ENTER] key.
Program Change Echo
Control Change Echo
2
Use the [INC] and [DEC] keys to turn the selected
parameter ON (echo enabled) or OFF (echo
disabled).
3
Set other MIDI functions as required.
NOTE
The transmit and receive channels are not used for control change
transmission and reception (page 79). Since they are used for
NRPN and scene number INC/DEC transmission and reception,
it is necessary to set the transmit and receive channels of the
external MIDI device to match those of the PM5000.
MIDI ECHO
PGM ECHO:OFF
CTL ECHO:OFF
PGM ECHO:ON