ZyXEL Omni TA 128 User Guide - Page 134
Output Parameter, Output Value Description, Command, Options, Function & Description
View all ZyXEL Omni TA 128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Connect DTE Speed : Error Control Level : Protocol Link Speed : Octets Received : 0 Octets Sent : 0 Cause : Cause Value : 0 HDLC FCS Error : 0 HDLC Receive Over-run : 0 HDLC Transmit Under-run : 0 Output Parameter Connect DTE Speed Error Control Level Protocol Link Speed Octets Received Octets Sent Cause Cause Value HDLC FCS Error HDLC Transmit Under-run HDLC Receive Over-run Output Value Description Current on-line DTE speed. Error control protocol used for current session. Current on-line DCE speed, line speed. Number of data octets received from remote. Number of data octets sent to remote. Verbose disconnection reason for the last session. Numerical disconnection reason for the last session. Errors in frame (block) checksum (If there were many FCS Errors, you may have experienced problems on the line). For TA's processor power measurement. For TA's processor power measurement. Extended "AT&" Command Set Command Options Function & Description Ref. 122