ZyXEL Omni TA 128 User Guide - Page 145
S-Register Descriptions
View all ZyXEL Omni TA 128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
S-Register Descriptions The descriptions for each S-register. In most bit-mapped Sregisters, the default bit value is 0 (which is the normal situation) and only the non-default situation is described. Some reserved bits are for factory use and the user should not change them. Values followed by an asterisk * are the factory default settings. Basic S-Registers "ATSn=x" Command Function & Description Ref. S0= Set the number of rings on which the TA will +000 answer. A 0 value disables auto-answer. S1= Counts and stores number of rings from an +000 incoming call. S2= Define escape code character, default (43 +043 dec.). S3= Define ASCII Carriage Return. +013 S4= Define ASCII Line Feed. +010 S5= Define ASCII Backspace. +008 S7= Set duration, in number of seconds, TA waits +060 for a carrier. S8= Set duration, in seconds, for pause (,) option +002 in Dial command and pause between command re-executions for Repeat (>)command. Extended S-Registers "ATSn=x" Command bit dec hex Function and description S15= bit dec hex Bit-mapped register. 0,1 0 0 Even parity. 1 1 Odd parity. 2 2 * No parity. 2 0 0 * 1 stop bit. 4 4 2 stop bits. Ref. +130 133