ZyXEL Omni TA 128 User Guide - Page 162
be routed to another POTS
View all ZyXEL Omni TA 128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Command bit dec hex Function and description Ref. 32 20 Treat the number assigned by &ZI=n... as sub-address, and match with the called_party_subaddress for inbound call routing S120= Accumulated charging unit (MSB byte) for B1 channel 0 *0 0 Enable POTS port 1 call out. 1 1 Disable POTS port 1 call out. 1 *0 0 Enable POTS port 2 call out. 2 2 Disable POTS port 2 call out. 2 *0 0 Enable multi-answering while TA MSN is not assigned. 4 4 Handle incoming calls according to AT&Ln setting. 3 *0 0 If S120.2=1 is set and the POTS port is busy, calls will be routed to another POTS port. 8 8 If S120.2=1 is set and the POTS port is busy, calls will be rejected. 4 *0 0 Enable TA to accept global calls for a/b adapter and ISDN data. 16 10 Reject unmatched calls for a/b adapter and ISDN data. S124= dec hex Empty IP packet interval for +000 PPP 0- 0- Units of 1 sec. 255 FF S125= bit dec hex 0 *0 0 Two POTS and one DTE port. 150