ZyXEL Omni TA 128 User Guide - Page 18
Connecting Your TA128 to the Power, Supply, Connecting the TA128 to Your Computer
View all ZyXEL Omni TA 128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Connecting Your TA128 to the Power Supply To Connect your TA128 to the power supply, follow the steps given below: 1. Turn off your computer. 2. Make sure the power switch on the TA128 is in the OFF (down) position. 3. Connect the round end of the power adapter to the POWER JACK on the TA's back panel. 4. Plug the power supply unit to an AC wall jack then power on the TA128. 5. Observe the LED light status on the front panel of your TA128 and make sure PWR LED is on. O NOTE: Use only the power adapter supplied with your TA. Never use a power adapter designed for a different product. Connecting the TA128 to Your Computer Your TA128 comes with a 25 pin, male to female cable, which is to be used to connect the main serial port of TA128 to your computer serial port as seen in the figure below: 6