ZyXEL Omni TA 128 User Guide - Page 32
Dialing out for Analog Adapter Port 1, Dialing out for Analog Adapter Port 2, Manually switching
View all ZyXEL Omni TA 128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
(ATS83.7=1). This function is useful in the areas where ISDN service providers charge lower usage rate for voice (speech) calls. To enable this function, type: ATS83.7=1 To disable it, type: ATS83.7=0 Dialing out for Analog Adapter Port 1 Using the "A" command following the "ATD" will tell your TA128 to automatically switch call to analog adapter, Phone 1, once dialing is complete. Type: ATDA17146930762 O NOTE: You must have an analog modem connected to your analog port before you issue this command. Dialing out for Analog Adapter Port 2 Using the "B" command following the "ATD" will tell your TA128 to automatically switch calls to analog adapter Phone 2, once dialing is complete. Type: ATDB17146930762 Manually switching communication modes The manual switching functions will only be necessary if your communication software does not allow you to change your dialup string. Conventional dialing commands: ATD, ATDT and ATDP, used by many existing communication software, can be mapped onto one of the new dialing commands according to the AT&O setting as follows: 20