ZyXEL Omni TA 128 User Guide - Page 83
Call Broker, Call Reject
View all ZyXEL Omni TA 128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
AT Commands Description ATS79.3=0 Disable call waiting for POTS port 2. ATS79.3=1 Enable call waiting for POTS port 2 (Default). O Note: If you disable the call waiting function(S79.2=0 or S79.3=0), the second incoming call will be blocked. O Note: If you configure the POTS port for Modem/Fax connection (S79.4=1 or S79.5=1), the call waiting feature of the respective POTS port will be always disabled. There are several ways to deal with a second incoming call: • To accept the call, press the Flash key and 0 to accept the second call and place the first call on hold. Accept the second call: H Flash è H #0 • To reject the second call press the Flash key and 5. Reject the second call: H Flash è H #5 • To establish a three way conference call press the Flash key and 3. Establish a conference call: H Flash è H #3 Call Broker The call broker feature enables you to switch back and forth between the first and second calls by pressing the Flash key and 0. Call Broker: H Flash è H #0 Call Reject To disconnect an active call and return to a call that is on hold press the Flash key and 5. This allows you to disconnect a call without hanging up your handset. Call Reject: H Flash è H#5 71