ZyXEL Omni TA 128 User Guide - Page 19
Connecting the TA128 to your Computer Serial Port
View all ZyXEL Omni TA 128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Connecting the TA128 to your Computer Serial Port Figure 2 -2 Connecting the TA128 to Your Computer Complete the following steps to connect the TA128 to your computer: 1. Turn off the power to your computer. 2. Connect the male end of the 25 pin cable to serial port1. 3. Connect the other end of the cable (female end) to your computer's serial port. In case your computer only supplies a 9 pin serial connector, you will need to use a 25 pin to 9 pin converter (9 pin female to 25 pin male). If you have another type of serial port connector, such as on the Macintosh, you will need a special cable for the connection. 4. Once the connection is made, turn the computer back on. 7
7
Connecting the TA128 to your Computer Serial Port
Figure 2 -2 Connecting the TA128 to Your Computer
Complete the following steps to connect the TA128 to your
computer:
1.
Turn off the power to your computer.
2.
Connect the male end of the 25 pin cable to serial port1.
3.
Connect the other end of the cable (female end) to your
computer’s serial port. In case your computer only supplies a 9
pin serial connector, you will need to use a 25 pin to 9 pin
converter (9 pin female to 25 pin male). If you have another
type of serial port connector, such as on the Macintosh, you
will need a special cable for the connection.
4.
Once the connection is made, turn the computer back on.