ZyXEL P-336M User Guide - Page 40
ZyXEL P-336M User's Guide, Basic, Basic: Wireless: WLAN Security Setup: WPA-Enterprise,
View all ZyXEL P-336M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
ZyXEL P-336M User's Guide Figure 15 Basic: Wireless: WLAN Security Setup: WPA-Enterprise The following table describes the related labels in this screen. Table 14 Basic: WLAN Security Setup: WPA-Enterprise LABEL DESCRIPTION WPA WPA Mode Specify a WPA mode. Make sure the peer device(s) is also set to use the same WPA mode. Select WPA to set the P-336M to use WPA only. WPA is a older implementation than WPA2. Select WPA2 to set the P-336M to use WPA2 first and then WPA if connection fails with WPA2. Select WPA2 Only to set the P-336M to use WPA2 only. Cipher Type Specify the encryption mechanism. Select TKIP, AES or TKIP and AES. Group Key Update This is the rate at which an AP or RADIUS server sends a new group key out to all Interval clients. The re-keying process is the WPA equivalent of automatically changing the WEP key for an AP and all stations in a WLAN on a periodic basis. Enter an update time in seconds. PRE SHARED KEY Pre-Shared Key Type a pre-shared key from 8 to 63 case-sensitive ASCII characters (including spaces and symbols). Chapter 3 Basic 40