ZyXEL SBG3300-N Series User Guide - Page 106
Table 33, Label, Description
View all ZyXEL SBG3300-N Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Chapter 7 LAN 3 Click Apply to save your settings. Figure 54 Network Setting > LAN > LAN Setup The following table describes the fields in this screen. Table 33 Network Setting > LAN > LAN Setup LABEL DESCRIPTION Interface Group Group Name Select the interface group name for which you want to configure LAN settings. See Chapter 12 on page 169 for how to create a new interface group/VLAN. Zone Select the security zone (LAN, WLAN, DMZ, or EXTRA) in which to include the LAN interface. A newly created local network (interface group) belongs to the LAN zone by default. LAN IP Setup IP Address Enter the LAN IP address you want to assign to your Device in dotted decimal notation, for example, 192.168.1.1 (factory default). Subnet Mask Type the subnet mask of your network in dotted decimal notation, for example 255.255.255.0 (factory default). Your Device automatically computes the subnet mask based on the IP Address you enter, so do not change this field unless you are instructed to do so. IGMP Snooping Status Select the Enable IGMP Snooping check box to allows the Device to passively learn multicast group. 106 SBG3300-N Series User's Guide