ZyXEL SBG3300-N Series User Guide - Page 21
The RESET Button, Wireless Access
View all ZyXEL SBG3300-N Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Chapter 1 Introducing the Device Table 1 LED Descriptions (continued) LED COLOR STATUS DESCRIPTION MOBILE Green On The 3G WAN connection is working. Blinking The Device is sending or receiving data to/from the 3G WAN connection. Off There is no 3G WAN connection. USB Green On The Device recognizes a USB connection. Blinking The Device is sending/receiving data to /from the USB device connected to it. Off The Device does not detect a USB connection. WLAN/WPS Green On The wireless network is activated. Blinking The Device is communicating with other wireless clients. Green and Orange Blinking The Device is setting up a WPS connection. Off The wireless network is not activated. 1.6 The RESET Button If you forget your password or cannot access the web configurator, you will need to use the RESET button at the back of the device to reload the factory-default configuration file. This means that you will lose all configurations that you had previously and the password will be reset to "1234". 1 Make sure the POWER LED is on (not blinking). 2 To set the device back to the factory default settings, press the RESET button for ten seconds or until the POWER LED begins to blink and then release it. When the POWER LED begins to blink, the defaults have been restored and the device restarts. 1.7 Wireless Access The Device is a wireless Access Point (AP) for wireless clients, such as notebooks, smartphones, or tablets. It allows them to connect to the Internet without having to rely on inconvenient Ethernet cables. SBG3300-N Series User's Guide 21