ZyXEL SBG3300-N Series User Guide - Page 20
LEDs Lights
![]() |
View all ZyXEL SBG3300-N Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Chapter 1 Introducing the Device 1.5 LEDs (Lights) The following graphic displays the labels of the LEDs. Figure 5 LEDs on the Device None of the LEDs are on if the Device is not receiving power. Table 1 LED Descriptions LED COLOR STATUS POWER Green On Blinking Red On ETHERNET LAN 1-4 Green ETHERNET Green Off On Blinking Off On Blinking DSL INTERNET Green Orange Green Off On Blinking Off On Blinking Off On Blinking Red On Off DESCRIPTION The Device is receiving power and ready for use. The Device is self-testing. The Device detected an error while self-testing, or there is a device malfunction. The Device is not receiving power. The Device has a successful Ethernet connection with a device on the Local Area Network (LAN). The Device is sending or receiving data to/from the LAN. The Device does not have an Ethernet connection with the LAN. The Gigabit Ethernet connection is working. The Device is sending or receiving data to/from the Gigabit Ethernet link. There is no Gigabit Ethernet link. The ADSL line is up. The Device is initializing the ADSL line. The ADSL line is down. The VDSL line is up. The Device is initializing the VDSL line. The VDSL line is down. The Device has an IP connection but no traffic. Your device has a WAN IP address (either static or assigned by a DHCP server), PPP negotiation was successfully completed (if used) and the DSL connection is up. The Device is sending or receiving IP traffic. The DSL port is connected to a DSL jack or the Ethernet WAN port is connected to an Ethernet port but the Device cannot access the Internet. There is an Internet connection problem. There is no Internet connection or the gateway is in bridged mode. 20 SBG3300-N Series User's Guide
![](/manual_guide/products/zyxel-sbg3300n-series-user-guide-222663b/20.png)