ZyXEL VES1724-56 User Guide - Page 31
Console Port, ALARM Slot
View all ZyXEL VES1724-56 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Chapter 3 Hardware Overview The default IP address of the management port is 192.168.0.1 with a subnet mask of 255.255.255.0. 3.1.5 Console Port For local management, you can use a computer with terminal emulation software configured to the following parameters: • VT100 • Terminal emulation • 115200 bps • No parity, 8 data bits, 1 stop bit • No flow control Connect the male 9-pin end of the console cable to the console port of the Switch. Connect the female end to a serial port (COM1, COM2 or other COM port) of your computer. 3.1.6 ALARM Slot The ALARM port is a male 9-pin connector. The following figure shows the pin assignments. Figure 13 Alarm Port: Pin Assignment The following table describes the alarm pins. Table 2 Alarm Port: Pin Assignment ALARM INPUT 1 PIN Pin 2 and Pin 6 2 Pin 3 and Pin 7 3 Pin 4 and Pin 8 4 Pin 5 and Pin 9 DESCRIPTION An open circuit for pins 2 and 6 indicates no alarm status. A closed circuit indicates an alarm status. An open circuit for pins 3 and 7 indicates no alarm status. A closed circuit indicates an alarm status. An open circuit for pins 4 and 8 indicates no alarm status. A closed circuit indicates an alarm status. An open circuit for pins 5 and 9 indicates no alarm status. A closed circuit indicates an alarm status. VES1724-56 User's Guide 31