ZyXEL VES1724-56 User Guide - Page 48
Tutorials
View all ZyXEL VES1724-56 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
CHAPTER 6 Tutorials This chapter provides some examples of using the Web Configurator to set up and use the Switch. The tutorial describes: • How to Use DHCP Relay Per VLAN on the Switch 6.1 How to Use DHCP Relay Per VLAN on the Switch This tutorial describes how to configure your Switch to forward DHCP client requests from a client to a DHCP server in a specific VLAN. The DHCP server can then assign a specific IP address based on the information in the DHCP requests. 6.1.1 DHCP Relay Tutorial Introduction In this example, you have configured your DHCP server (say 172.16.1.18) and want to have it assign a specific IP address (say 192.168.2.3) to DHCP client A based on the system name, VLAN ID and port number in the DHCP request. Client A connects to the Switch's port 2 and the DHCP server connects to port 18. Both port 2 and port 18 are in VLAN 102. Figure 22 Tutorial: DHCP Relay Per VLAN Scenario 172.16.1.254 192.168.2.254 DHCP Server 172.16.1.18 Port 18 PVID=102 Port 2 PVID=102 CPE A 192.168.2.3 6.1.2 Creating a VLAN Follow the steps below to configure ports 2 and 18 as a member of VLAN 102. 1 Access the Web Configurator through the Switch's management port. VES1724-56 User's Guide 48