ZyXEL VES1724-56 User Guide - Page 364
Switch Access and Login
View all ZyXEL VES1724-56 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 364 highlights
Chapter 47 Troubleshooting One of the LEDs does not behave as expected. 1 Make sure you understand the normal behavior of the LED. See Section 3.2 on page 32. 2 Check the hardware connections. See Section 47.1 on page 363. 3 Inspect your cables for damage. Contact the vendor to replace any damaged cables. 4 Turn the Switch off and on (in DC models or if the DC power supply is connected in AC/DC models). 5 Disconnect and re-connect the power adaptor or cord to the Switch (in AC models or if the AC power supply is connected in AC/DC models). 6 If the problem continues, contact the vendor. 47.2 Switch Access and Login I forgot the IP address for the Switch. 1 The default in-band management IP address is 192.168.1.1. 2 Use the console port to log in to the Switch. 3 Use the MGMT port to log in to the Switch, the default management IP address of the MGMT port is 192.168.0.1. 4 If this does not work, you have to reset the device to its factory defaults. See Section 4.6 on page 42. I forgot the username and/or password. 1 The default username is admin and the default password is 1234. 2 If this does not work, you have to reset the device to its factory defaults. See Section 4.6 on page 42. I cannot see or access the Login screen in the Web Configurator. 1 Make sure you are using the correct IP address. 364 VES1724-56 User's Guide