2012 Chrysler Town & Country Owner Manual - Page 101

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 99 "Automatic Locking Mode" description under "Seat then allow the belt to retract into the retractor. As the belt Belts in Passenger Seating Positions" section. The chart retracts, you will hear a ratcheting sound. This indicates below defines the seating positions with an Automatic the safety belt is now in the Automatic Locking mode. Locking Retractor (ALR) or a cinching latch plate. 2. Finally, pull on any excess webbing to tighten the lap Driver Center Passenger portion around the child restraint. Any seat belt system CRS Lock CRS Lock CRS Lock will loosen with time, so check the belt occasionally, and pull it tight if necessary. First Row N/A N/A ALR Second Row ALR N/A ALR Installing a Child Restraint with a Cinching Latch Plate: Third Row ALR Cinch ALR 1. To install a child restraint with a cinching latch plate, • N/A - Not Applicable first, pull enough of the seat belt webbing from the retractor to route it through the belt path of the child • ALR - Automatic Locking Retractor restraint. Slide the latch plate into the buckle until you Installing a Child Restraint with an ALR: hear a "click." 1. To install a child restraint with ALR, first, pull enough 2. Finally, pull on any excess webbing to tighten the lap of the seat belt webbing from the retractor to route it portion around the child restraint. Any seat belt system through the belt path of the child restraint. Slide the latch will loosen with time, so check the belt occasionally, and plate into the buckle until you hear a "click." Next, pull it tight if necessary. extract all the seat belt webbing out of the retractor and 2