2012 Chrysler Town & Country Owner Manual - Page 430

428 STARTING AND OPERATING 2. The ignition switch will return to the OFF position. 3. If the shift lever is not in PARK, the ENGINE START/ STOP button must be held for two seconds and vehicle speed must be above 5 mph (8 km/h) before the engine will shut off. The ignition switch position will remain in the ACC position until the shift lever is in PARK and the button is pressed twice to the OFF position. If the shift lever is not in PARK and the ENGINE START/STOP button is pressed once, the EVIC (if equipped) will • Starting with the ignition switch in the OFF position: display a "Vehicle Not In Park" message and the engine • Press the ENGINE START/STOP button once to will remain running. Never leave a vehicle out of the change the ignition switch to the ACC position (EVIC PARK position, or it could roll. displays "IGNITION MODE ACCESSORY"), NOTE: If the ignition switch is left in the ACC or RUN • Press the ENGINE START/STOP button a second time (engine not running) position and the transmission is in to change the ignition switch to the RUN position PARK, the system will automatically time out after (EVIC displays "IGNITION MODE RUN"), 30 minutes of inactivity and the ignition will switch to the • Press the ENGINE START/STOP button a third time OFF position. to return the ignition switch to the OFF position (EVIC displays "IGNITION MODE OFF"). Keyless Enter-N-Go Functions - With Driver's Foot OFF The Brake Pedal (In PARK Or NEUTRAL Position) The Keyless Enter-N-Go feature operates similar to an ignition switch. It has four positions, OFF, ACC, RUN and START. To change the ignition switch positions without starting the vehicle and use the accessories follow these steps.