2012 Chrysler Town & Country Owner Manual - Page 241

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 239 3. Simultaneously press and hold both the Homelink௡ button you want to program and the hand-held transmitter button. 4. Continue to hold both buttons and observe the indicator light. The Homelink௡ indicator will flash slowly and then rapidly after Homelink௡ has received the frequency signal from the hand-held transmitter. Release both buttons after the indicator light changes from slow to rapid. 5. At the garage door opener motor (in the garage), locate the "LEARN" or "TRAINING" button. This can Training The Garage Door Opener usually be found where the hanging antenna wire is attached to the garage door opener/device motor. Firmly 1 - Door Opener 2 - Training Button press and release the "LEARN" or "TRAINING" button. On some garage door openers/devices there may be a 1. Turn the ignition switch to the ON/RUN position. light that blinks when the garage door opener/device is 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) in the LEARN/TRAIN mode. away from the HomeLink௡ button you wish to program while keeping the HomeLink௡ indicator light in view. 3