2012 Chrysler Town & Country Owner Manual - Page 242

240 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: You have 30 seconds in which to initiate the next 2. Press and hold the desired HomeLink௡ button until the indicator light begins to flash after 20 seconds. Do not step after the LEARN button has been pressed. release the button. 6. Return to the vehicle and press the programmed HomeLink௡ button twice (holding the button for two 3. Without releasing the button proceed with "Programseconds each time). If the garage door opener/device ming A Rolling Code" Step 2 and follow all remaining steps. activates, programming is complete. NOTE: If the garage door opener/device does not Programming A Non-Rolling Code activate, press the button a third time (for two seconds) to For programming Garage Door Openers manufactured before 1995. complete the training. To program the remaining two HomeLink௡ buttons, 1. Turn the ignition switch to the ON/RUN position. repeat each step for each remaining button. DO NOT 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) erase the channels. away from the HomeLink௡ button you wish to program Reprogramming A Single HomeLink௡ Button while keeping the HomeLink௡ indicator light in view. To reprogram a channel that has been previously trained, 3. Simultaneously press and hold both the Homelink௡ follow these steps: button you want to program and the hand-held transmit1. Turn the ignition switch to the ON/RUN position. ter button.