2012 Chrysler Town & Country Owner Manual - Page 300

298 UNDERSTANDING YOUR INSTRUMENT PANEL If the light remains on when the parking brake has been disengaged, and the fluid level is at the full mark on the master cylinder reservoir, it indicates a possible brake hydraulic system malfunction or that a problem with the Brake Booster has been detected by the Anti-Lock Brake 17. Vehicle Security Light - If Equipped System (ABS) / Electronic Stability Control (ESC) system. This light will flash at a fast rate for approxiIn this case, the light will remain on until the condition mately 15 seconds, when the vehicle security has been corrected. If the problem is related to the brake alarm is arming, and then will flash slowly booster, the ABS pump will run when applying the brake until the vehicle is disarmed. and a brake pedal pulsation may be felt during each stop. 18. Brake Warning Light The dual brake system provides a reserve braking capacThis light monitors various brake functions, ity in the event of a failure to a portion of the hydraulic including brake fluid level and parking brake system. A leak in either half of the dual brake system is application. If the brake light turns on it may indicated by the Brake Warning Light, which will turn on indicate that the parking brake is applied, that when the brake fluid level in the master cylinder has the brake fluid level is low, or that there is a problem with dropped below a specified level. the anti-lock brake system reservoir. The light will remain on until the cause is corrected. Select (ERS) feature is active. Use the +/- selector on the shift lever to activate ERS. Refer to "Automatic Transmission" in "Starting And Operating" for further information.