2012 Chrysler Town & Country Owner Manual - Page 207

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205 To activate the Halo lights, rotate the Halo the headlight switch to the extreme counterclockwise switch control upward or downward to in- position aligning the indicator with AUTO on the headlight switch. When the system is on, the Headlight Time crease or decrease the lighting. Delay feature is also on. This means your headlights will stay on for up to 90 seconds after you turn the ignition Parking Lights Turn the headlight switch knob to the first detent switch OFF. To turn the Automatic System off, turn the to turn the parking lights on. This also turns on all headlight switch clockwise to the O (Off) position. instrument panel lighting. NOTE: The engine must be running before the headlights will come on in the Automatic mode. Headlights Turn the headlight switch knob to the second Headlights On With Wipers - If Equipped detent to turn the headlights and parking lights When your headlights are in the Automatic mode and the on. This also turns on all instrument panel engine is running, the headlights will automatically turn lighting. on when the wiper system is also turned on. Headlights To change the brightness of the instrument panel lights, on when windshield wipers are on may be found on vehicles equipped with an automatic headlight system. rotate the dimmer control up or down. Refer to "Electronic Vehicle Information Center (EVIC)/ Automatic Headlights - If Equipped Customer-Programmable Features" in "Understanding This system automatically turns your headlights on or off Your Instrument Panel" for further information. based on ambient light levels. To turn the system on, turn 3