2012 Chrysler Town & Country Owner Manual - Page 221
2012 Chrysler Town & Country Manual
Page 221 highlights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 219 To Set A Desired Speed Turn the Electronic Speed Control ON. When the vehicle has reached the desired speed, press the SET (-) button and release. Release the accelerator and the vehicle will operate at the selected speed. NOTE: The vehicle should be traveling at a steady speed and on level ground before pressing the SET button. Pressing the RES (+) button once will result in a 1 mph (2 km/h) increase in set speed. Each subsequent tap of To Deactivate the button results in an increase of 1 mph (2 km/h). A soft tap on the brake pedal, pushing the CANCEL button, or normal brake pressure while slowing the To decrease speed while the Electronic Speed Control is vehicle will deactivate Electronic Speed Control without set, push the SET (-) button. If the button is continually erasing the set speed memory. Pressing the ON/OFF held in the SET (-) position, the set speed will continue to button or turning the ignition switch OFF erases the set decrease until the button is released. Release the button speed memory. when the desired speed is reached, and the new set speed will be established. To Resume Speed To resume a previously set speed, push the RES (+) Pressing the SET (-) button once will result in a 1 mph button and release. Resume can be used at any speed (2 km/h) decrease in set speed. Each subsequent tap of above 20 mph (32 km/h). the button results in a decrease of 1 mph (2 km/h). To Vary The Speed Setting When the Electronic Speed Control is set, you can increase speed by pushing the RES (+) button. If the button is continually pressed, the set speed will continue to increase until the button is released, then the new set speed will be established. 3