2012 Chrysler Town & Country Owner Manual - Page 597

MAINTAINING YOUR VEHICLE 595 Quad Headlamps 1. Raise the hood to access the high or low beam bulbs at the rear of the headlamp housing. 5. Reconnect the wiring connector to the bulb. Front Park/Turn Signal Lamp 1. Raise the hood to access the rear of the headlamp 2. Release the two tabs on the side of the connector and housing. remove the connector from the bulb. 2. Twist the turn signal socket and remove from the 3. Twist the headlamp bulb and pull the bulb from the headlamp housing, then pull the bulb out. headlamp housing. 3. Push the new bulb into the socket and reinstall the 4. Install the new headlamp bulb and twist until locked socket by twisting until locked into the headlamp housing. into the headlamp housing. CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. 7