2012 Chrysler Town & Country Owner Manual - Page 26

24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Settings (Customer-Programmable Features)" in "Un- 5. Repeat these steps if you want to return this feature to derstanding Your Instrument Panel" for further infor- its previous setting. mation. NOTE: Pressing the LOCK button on the RKE transmit• For vehicles not equipped with the EVIC, perform the ter while you are in the vehicle will activate the Vehicle following steps: Security Alarm. Opening a door with the Vehicle Security Alarm activated will cause the alarm to sound. Press the 1. Perform this operation while standing outside the UNLOCK button to deactivate the Vehicle Security vehicle. Alarm. 2. Press the LOCK button on a programmed RKE transUsing The Panic Alarm mitter for at least 4 seconds, but no longer than 10 secTo turn the Panic Alarm feature on or off, press and hold onds. Then, press the PANIC button while still holding the PANIC button on the RKE transmitter for at least one the LOCK button. second and release. When the Panic Alarm is on, the headlights and park lights will flash, the horn will pulse 3. Release both buttons at the same time. on and off, and the interior lights will turn on. 4. Test the feature while outside of the vehicle by pressing the LOCK button on the RKE transmitter with the The Panic Alarm will stay on for three minutes unless ignition switch in the OFF position and the Key Fob you turn it off by pressing the PANIC button a second time or if the vehicle is driven above 5 mph (8 km/h). removed.