2012 Chrysler Town & Country Owner Manual - Page 201

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 To recall the memory setting for driver two, press 3. Press and release the memory SET (S) button located MEMORY button 2 on the driver's door or the UNLOCK on the driver's door. A chime will sound signaling that button on the RKE transmitter linked to Memory Position you are in the memory set mode. 2. 4. Within five seconds, press and release MEMORY A recall can be cancelled by pressing any of the button 1 on the driver's door. A chime will sound MEMORY buttons on the driver's door during a recall (S, signaling to you that the driver memory has been set. 1, or 2). When a recall is cancelled, the driver's seat, 5. Within five seconds, press and release the UNLOCK driver's mirror, and the pedals stop moving. A delay of button on the RKE transmitter. A chime will sound one second will occur before another recall can be signaling to you that the RKE transmitter link has been selected. successfully disabled. To Disable RKE Transmitter Linked To Memory To disable another RKE transmitter linked to either Memory 1. Turn the ignition switch to the OFF position and Position, repeat Steps 1 to 5 for each RKE transmitter. remove the key. NOTE: Once programmed, all RKE transmitters linked 2. Press and release MEMORY button 1. The system will to memory can be easily enabled or disabled at one time. recall any memory settings stored in position 1. Wait for Refer to "Electronic Vehicle Information Center (EVIC)/ the system to complete the memory recall before continu- Customer-Programmable FeaturesЉ in "Understanding Your Instrument Panel" for further information. ing to Step 3. 3