2012 Chrysler Town & Country Owner Manual - Page 429

STARTING AND OPERATING 427 2. Insert the ENGINE START/STOP button into the Normal Starting ignition switch with the lettering facing up and readable. Using The ENGINE START/STOP Button 3. Press firmly on the center of the button to secure it into NOTE: Normal starting of either a cold or a warm position. engine is obtained without pumping or pressing the accelerator pedal. Removing The Button 1. The ENGINE START/STOP button can be removed To start the engine, the transmission must be in PARK or NEUTRAL. Press and hold the brake pedal while pressfrom the ignition switch for key fob use. ing the ENGINE START/STOP button once. The system 2. Insert the metal part of the emergency key under the takes over and attempts to start the vehicle. If the vehicle chrome bezel at the 6 o'clock position and gently pry the fails to start, the starter will disengage automatically after button loose. 10 seconds. If you wish to stop the cranking of the engine NOTE: The ENGINE START/STOP button should only prior to the engine starting, press the button again. be removed or inserted with the ignition in the LOCK To Turn Off The Engine Using ENGINE position (OFF position for Keyless Enter-N-Go). START/STOP Button 1. Place the shift lever in PARK, then press and release the ENGINE START/STOP button. 5