2012 Chrysler Town & Country Owner Manual - Page 316

314 UNDERSTANDING YOUR INSTRUMENT PANEL Vehicles Not Equipped With Keyless Enter-N-Go Fuel Economy Press and release the UP or DOWN button until "Fuel 1. Turn the ignition switch to the ON/RUN position (Do Economy" displays highlighted in the EVIC and press not start the engine.) the SELECT button. The following Fuel Economy func2. Fully depress the accelerator pedal, slowly, three times tions display in the EVIC: within 10 seconds. • Average Fuel Economy (AVG) 3. Turn the ignition switch to the OFF/LOCK position. • Distance To Empty (DTE) NOTE: If the indicator message illuminates when you • Miles Per Gallon (MPG) start the engine, the oil change indicator system did not Average Fuel Economy reset. If necessary, repeat these steps. Shows the average fuel economy since the last reset. The Average Fuel Economy can be reset by following the prompt in the EVIC to use the SELECT button. When the fuel economy is reset, the display will read "zero" for two seconds. Then, the history information will be erased, and the averaging will continue from the last fuel average reading before the reset.