2012 Chrysler Town & Country Owner Manual - Page 211
2012 Chrysler Town & Country Manual
Page 211 highlights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209 Flash-To-Pass You can signal another vehicle with your headlights by lightly pulling the multifunction lever toward you. This will turn on the high beam headlights until the lever is released. SmartBeam™ - If Equipped The SmartBeam™ system provides increased forward lighting at night by automating high beam control through the use of a digital camera mounted on the inside rearview mirror. This camera detects vehicle specific light and automatically switches from high beams to low beams until the approaching vehicle is out of view. To Activate 2. Rotate the headlight switch counterclockwise to the AUTO (A) position. 3. Push the multifunction lever away from you to switch the headlights to the high beam position. Refer to "Multifunction Lever" in this section for further information. NOTE: This system will not activate until the vehicle is at, or above, 25 mph (40 km/h). To Deactivate Perform either of the following steps to deactivate the SmartBeam™ system. 3 1. Select "Automatic High Beams - OFF" through the EVIC. Refer to "Electronic Vehicle Information Center (EVIC)/Customer-Programmable Features" in "Under1. Select "Automatic High Beams - ON" through the standing Your Instrument Panel" for further information. EVIC. Refer to "Electronic Vehicle Information Center (EVIC)/Customer-Programmable Features" in "Under- 2. Pull the multifunction lever toward you to switch the standing Your Instrument Panel" for further information. headlights from the high beam to the low beam position.