2012 Chrysler Town & Country Owner Manual - Page 68
2012 Chrysler Town & Country Manual
Page 68 highlights
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. To release the belt, push the red button on the buckle. Pull the strap down and secure the small latch plate of The belt will automatically retract to its stowed position. the lap belt into the small buckle until you hear a "click". If necessary, slide the latch plate down the webbing to Position the shoulder belt on your chest so that it is allow the belt to retract fully. comfortable and not resting on your neck. When the belt is long enough to fit, insert the large latch plate into the WARNING! buckle until you hear a "click." The retractor should withdraw any slack in the belt. A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system To release the small latch plate, position the end of the periodically, checking for cuts, frays, or loose parts. large latch plate against the red button on the small latch Damaged parts must be replaced immediately. Do plate and push upward. Reinstall the latch plates into the not disassemble or modify the system. Seat belt headliner. assemblies must be replaced after a collision if they have been damaged (bent retractor, torn webbing, Adjustable Upper Shoulder Belt Anchorage In the front seats and the second row outboard seats, the etc.). shoulder belt anchorage can be adjusted upward or downward to help position the belt away from your Third Row Center Shoulder Belt Instructions The shoulder belt for the third row center seat is located neck. The upper anchorage can be adjusted upward by in the headliner slightly behind the third row seat.