2012 Chrysler Town & Country Owner Manual - Page 304

302 UNDERSTANDING YOUR INSTRUMENT PANEL 24. Engine Temperature Warning Light This light warns of an overheated engine condition. As engine coolant temperatures rise and the gauge approaches H , this indicator will illuminate and a single chime will sound after reaching a set threshold. Further overheating will cause the temperature gauge to pass H , the indicator will continuously flash and a continuous chime will occur until the engine is allowed to cool. 25. Electronic Throttle Control (ETC) Light This light informs you of a problem with the Electronic Throttle Control (ETC) system. The light will come on when the ignition is first turned to ON/RUN and remain on briefly as a bulb check. If the light does not come on during starting, have the system checked by an authorized dealer. If a problem is detected, the light will come on while the engine is running. Cycle the ignition key when the If the light turns on while driving, safely pull over and vehicle has completely stopped and the shift lever is stop the vehicle. If the A/C system is on, turn it off. Also, placed in the PARK position, the light should turn off. shift the transmission into NEUTRAL and idle the veIf the light remains lit with the engine running, your hicle. If the temperature reading does not return to vehicle will usually be drivable; however, see an authonormal, turn the engine off immediately and call for rized dealer for service as soon as possible. If the light is service. Refer to "If Your Engine Overheats" in "What To flashing when the engine is running, immediate service is Do In Emergencies" for further information. required and you may experience reduced performance, an elevated/rough idle or engine stall and your vehicle may require towing.