2012 Chrysler Town & Country Owner Manual - Page 571

MAINTAINING YOUR VEHICLE 569 Avoid using the wiper blades to remove frost or ice from the windshield. Keep the blade rubber out of contact with petroleum products such as engine oil, gasoline, etc. WARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. NOTE: Life expectancy of wiper blades varies depending on geographical area and frequency of use. Poor performance of blades may be present with chattering, marks, water lines or wet spots. If any of these conditions After the engine has warmed, operate the defroster for a are present, clean the wiper blades or replace as necesfew minutes to reduce the possibility of smearing or sary. freezing the fluid on the cold windshield. MOPAR௡ All Adding Washer Fluid Weather Windshield Washer Solution or equivalent, used The fluid reservoir for the windshield washers and the with water as directed on the container, aids cleaning rear window washer is shared. It is located in the engine action, reduces the freezing point to avoid line clogging, compartment and should be checked at regular intervals. and is not harmful to paint or trim. Fill the reservoir with windshield washer solvent (not radiator antifreeze) and operate the system for a few seconds to flush out any residual water. The washer fluid reservoir will hold a full gallon of fluid when the Low Washer Fluid Light illuminates. 7