2012 Chrysler Town & Country Owner Manual - Page 428

426 STARTING AND OPERATING CAUTION! (Continued) • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Do not shift from REVERSE, PARK, or NEUTRAL into any forward gear when the engine is above idle speed. • Before shifting into any gear, make sure your foot is firmly on the brake pedal. automatically when the engine is running. If the engine fails to start, the starter will disengage automatically in 10 seconds. If this occurs, turn the ignition switch to the LOCK position, wait 10 to 15 seconds, then repeat the "Normal Starting" procedure. Keyless Enter-N-Go - If Equipped This feature allows the driver to operate the ignition switch with the push of a button, as long as the ENGINE START/STOP button is installed and the Remote Keyless Entry (RKE) transUsing Fob With Integrated Key (Tip Start) mitter is in the passenger compartNOTE: Normal starting of either a cold or a warm ment. engine is obtained without pumping or pressing the Installing And Removing The ENGINE accelerator pedal. START/STOP Button Do not press the accelerator. Use the Fob with Integrated Key to briefly turn the ignition switch to the START Installing The Button position and release it as soon as the starter engages. The 1. Remove the key fob from the ignition switch. starter motor will continue to run, and it will disengage