Brother International DCP-J140W Software Users Manual - English - Page 82
Saving the scanned image, How to change the default settings of each button, E-mail, PreScan, Image
View all Brother International DCP-J140W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
ControlCenter4 c Click (E-mail). d Your default E-mail application will open and the image will be attached to a new, blank E-mail. Saving the scanned image 3 3 The (File) button lets you scan an image to a folder on your hard drive in one of the file types shown in the file type list. a Select the Scan tab. b If you want to change the scan settings, right-click (File) and then change the settings. If you want to preview and configure the scanned image, check PreScan. Click OK. c Click (File). d The image will be saved in the folder you have chosen. How to change the default settings of each button 3 You can change the default settings of the (Image), (OCR), (E-mail) and (File) button. a Right-click the button that you want to configure and click Button settings. The settings dialog will appear. b Choose the settings for File Type, PreScan, Resolution, Scan Type, Document Size, Brightness, Contrast and Continuous Scanning as needed. c Click OK. The new settings will be used as the default settings. Note To preview and configure the scanned image, check PreScan in the settings dialog. 75