Brother International HL 5030 Service Manual - Page 133
Remove the bind B M3x10 Taptite screw, and then remove the thermistor relay PCB
View all Brother International HL 5030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY (23) Disconnect the connector for the eject sensor harness from the thermistor relay PCB ASSY. (24) Release the eject sensor harness from the three hooks. (25) Remove the bind B M3x10 Taptite screw, and then remove the eject sensor PCB ASSY. (26) Remove the bind B M3x10 Taptite screw, and then remove the thermistor relay PCB ASSY. Hooks Hook Eject sensor harness Taptite, bind B M3x10 Thermistor relay PCB ASSY Eject sensor PCB ASSY Taptite, bind B M3x10 Fig. 4-63 FU frame lower (27) Remove the paper eject actuator and eject actuator spring. Paper eject actuator (hook) 1 Eject actuator spring 3 2 FU frame lower Fig. 4-64 4-36
CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
4-36
(23) Disconnect the connector for the eject sensor harness from the thermistor relay PCB
ASSY.
(24) Release the eject sensor harness from the three hooks.
(25) Remove the bind B M3x10 Taptite screw, and then remove the eject sensor PCB ASSY.
(26) Remove the bind B M3x10 Taptite screw, and then remove the thermistor relay PCB
ASSY.
Fig. 4-63
(27) Remove the paper eject actuator and eject actuator spring.
Fig. 4-64
Taptite, bind B M3x10
Taptite, bind B M3x10
FU frame lower
Thermistor relay PCB ASSY
Eject sensor PCB ASSY
FU frame lower
Eject actuator spring
Paper eject actuator
(hook)
Hooks
Hook
Eject sensor harness
1
2
3