Brother International HL 5030 Service Manual - Page 211
Black and blurred horizontal stripes, Black vertical streaks in a gray background, power supply PCB?
View all Brother International HL 5030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 211 highlights
HL-5030/5040/5050/5070N SERVICE MANUAL I-7 Black and blurred horizontal stripes User Check (1) The drum unit may be damaged. Install a new drum unit. (2) Check the paper used meets the recommended paper specifications. (3) Clean the printer interior and the corona wire in the drum unit. Possible cause Step Check Scratch on the drum 1 Are the horizontal stripes at 94mm (photosensitive drum) intervals? Toner stuck on the developer roller 2 Are the horizontal stripes at 39mm (developer roller) intervals? Scratch on the heat roller Corona contact failure High-voltage power supply PCB failure 3 Are the horizontal stripes at 79mm (heat roller) intervals? 4 Are the charge electrodes between the printer body and the drum unit dirty? 5 Is the problem solved after replacing the high-voltage power supply PCB? Result Remedy Yes The photosensitive drum was scratched. Replace the drum unit. Yes After printing several pages, the problem will disappear. If not, replace the toner cartridge. Yes Replace the heat roller. Yes Clean both electrodes. Yes Replace the highvoltage power supply PCB. Ground contacts (3) I-8 Black vertical streaks (in a gray background) Possible cause Translucent stain on the scanner window Corona failure Step Check Result Remedy 1 Is there any dirt on the scanner Yes 1) Clean the scanner window? window. 2) If it is not effective, replace the laser unit. 2 Is the corona wire dirty? Yes Clean the corona wire with the wire cleaner. Ground contacts (2) 6-31