Brother International HL 5030 Service Manual - Page 212
White vertical streaks, White horizontal stripes, High temperature and high humidity conditions
View all Brother International HL 5030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 212 highlights
CHAPTER 6 TROUBLESHOOTING I-9 White vertical streaks User Check (1) Try to wipe the scanner window with a soft cloth. (2) The toner cartridge may be damaged. Install a new toner cartridge. (3) Check the printer's environment. High temperature and high humidity conditions can cause this problem. (4) Damp (wet) paper might be used. Try to change to freshly unpacked paper. Possible cause Transfer failure Condensation Step Check 1 Is the transfer roller scratched? 2 Has condensation occurred inside the printer? Result Remedy Yes Replace the drum unit. Yes Try to print several pages or leave the printer 2 hours to allow it to reach room temperature. I-10 White horizontal stripes User Check (1) Check the paper used meets the recommended paper specifications. A rough surfaced paper, damp paper or thick media can cause the problem. (2) Check that the appropriate media type is selected in the printer driver. (3) The problem may disappear by itself. Try printing multiple pages to clear this problem especially if the printer has not been used for a long time. (4) The drum unit may be damaged. Install a new drum unit. Possible cause Step Check Result Remedy Developing bias contact failure 1 Are the developing bias Yes Clean the electrodes contacts between the printer at both sides. body and toner cartridge dirty? Ground contacts (4) 6-32