Brother International HL 5030 Service Manual - Page 22
Paper cassette capacity, 3.5.3 Print delivery, HL-5050/5070N - hl 5040 printer problems
View all Brother International HL 5030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
CHAPTER 1 GENERAL CAUTION: When you are choosing print media, be sure to follow the information given below to prevent any paper jams, print quality problems or printer damage; • It is recommended to use long-grained paper for the best print quality. If short-grained paper is being used, it might be the cause of paper jams. • Use neutral paper. Do not use acid paper to avoid any damage to the drum unit. • Avoid using coated paper such as vinyl coated paper. • Avoid using preprinted or highly textured paper. • It is recommended to use labels or transparencies which are designed for use in laser printers. • Avoid feeding labels with the carrier sheet exposed, or the printer will be damaged. • Before loading paper with holes such as organizer sheets, be sure to fan the stack well. • Do not use organizer sheets that are stuck together. The glue that is used might caused damaged to the printer. • When printing on the back of pre-printed paper, if the paper is curled, be sure to straighten the paper as much as possible. • Different types of paper should not be loaded at the same time in the paper cassette to avoid any paper jams or misfeeds. 3.5.2 Paper cassette capacity Paper Capacity Tray 1 250 sheets (80 g/m2 or 20 lbs.) MP tray 50 sheets (80 g/m2 ) Tray 2 250 sheets (80 g/m2 or 20 lbs.) * Manual feed tray: Single sheet 3.5.3 Print delivery (1) Face down output tray capacity: Maximum 150 sheets (80 g/m2) face down only (2) Face up output tray capacity: (HL-5050/5070N) Maximum 25 sheets (80 g/m2) face up only (HL-5030/5040) Single sheet NOTE: Face-down: Face-up: Delivery with the printed face of the paper downwards. Delivery with the printed face of the paper upwards. 1-10