Brother International HL 5030 Service Manual - Page 164
<Change Drum message>, <Replacement Procedure>, Pull out the drum unit assembly.
View all Brother International HL 5030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
CHAPTER 5 PERIODIC MAINTENANCE If the LED shows the message below, it means the drum unit is near the end of its life. We recommend that you replace the drum unit with a new one before there is a noticeable deterioration in the print quality. Toner Drum Paper Status Fig.5-1 ! CAUTION: While removing the drum unit, handle it carefully because it may contain toner. (1) Press the cover release button; and then open the front cover of the printer. (2) Pull out the drum unit assembly. (Fig.5-2) Fig. 5-2 ! CAUTION: *We recommend that you place the drum unit assembly on a piece of disposable paper or cloth in case you accidentally spill or scatter toner. *To prevent damage to the printer from static electricity, do not touch the electrodes shown in the figure below. Fig.5-3 5-2