Brother International HL 5030 Service Manual - Page 166
<Toner Low message>, Toner, <Replacement Procedure>
View all Brother International HL 5030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
CHAPTER 5 PERIODIC MAINTENANCE NOTE: *There are many factors that determine the actual toner life, such as temperature, humidity, type of paper that you use, the number of pages per print job, etc. *The amount of toner used varies according to what is printed on the page and the print density setting. *The more that is printed, the more toner will be used. *If you change the print density setting for lighter or darker printing, the amount of toner that is used will change. *Wait to unpack the toner cartridge until immediately before you install it in the printer. The Toner LED alternates turning on for 2 seconds and off for 3 seconds. Toner Drum Paper Status Fig.5-6 If the LED shows this message, the toner cartridge has nearly run out of toner. Buy a new toner cartridge and have it ready before you get a Toner Empty message. NOTE: The Toner LED will blink continuously if the toner cartridge is nearly empty. Toner Drum Paper Status Fig.5-7 (1) Press the cover release button and then open the front cover. (2) Pull out the drum unit assembly. (Drum unit with toner cartridge). (Fig.5-8) Fig. 5-8 5-4