Brother International WP335B Owners Manual - English - Page 318
Changing, Correction, Tapes
View all Brother International WP335B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 318 highlights
Changing Correction Tapes This word processor uses correction tape to correct printing errors. Two types of correction tapes are available, Brother Lift off tape model #3010 (for use with the correctable film ribbon) and Brother Cover up tapes model #4010 (for use with the nylon ribbon). TW/WP LAYOUT Turn the power on and use TW/WP to switch the word processor to the Typewriter application. (SPACE BAR] Use [SPACE BAR] and BACKSPACE to move the carriage to the center of the platen. C. BACKSPACI E BS1 ..0 0 if Lift the acoustic cover and remove the ribbon cassette, if installed. (See Changing Ribbons on page 304.) NOTE: It is not possible to move the carriage while the acoustic cover is open. Close the acoustic cover to re-position the carriage. Grasp the spools with your thumbs in the positions shown and pull them off their mounts. Bring the tape back to a position parallel with the platen and then lift it up and out. 0 Pass the new tape through the left guide, behind the ribbon guide, and out through the right guide. 4 The rough side of the tape should face the 0 i platen. 306 Appendix