Canon FAX-JX200 FAX-JX200/JX201 User'sGuide - Page 64
Lcd Messages, Check!! 5100, Auto Print Off, Auto Redial, Busy/no Signal
View all Canon FAX-JX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
LCD Messages The following messages are displayed on the LCD when the fax is performing a function or encounters an error. !!CHECK!! 5100 Cause Action Movement of the FINE Cartridge Holder is blocked. There may be an obstruction that is not allowing the Cartridge Holder mechanism to move. The FINE Cartridge may be defective. During printing, the FINE Cartridge print head may have become too hot. An error requiring servicing might have occurred. Clear the paper jam or foreign object that is preventing the FINE Cartridge Holder from moving, then turn off the machine and turn it back on again. Check for any obstruction (paper clip, small object, etc.) and also that the protective tape are removed from the FINE Cartridge. Check also for a paper jam and clear the jam if necessary (see page 53). Then press [Stop] and start again. Press [Stop]. Reinstall the FINE Cartridge (see the Easy Setup Instructions) and start again. In either case, if the error does not clear, try unplugging the fax. Wait several minutes, then plug it back in. Also, try replacing the FINE Cartridge with a new one (see page 43). Allow the fax to cool down. The fax will resume printing when it has cooled down. Turn OFF the machine, and unplug the power cord of the machine from the power supply. After a while, plug the power cord of the machine back in and turn ON the machine. If the same error occurs, contact a Canon service representative. !!CHECK!! 5B00 Cause The ink absorber (which holds the ink used for print head cleaning) may be full. AUTO PRINT OFF Action Contact a Canon service representative as early as possible. Cause The feature has been enabled by pressing [ON/OFF] quickly. AUTO REDIAL Action The received fax is stored in the memory. To cancel the setting and print received faxes automatically, press [ON/OFF] again (see page 32). Cause Action The fax is waiting to redial the receiving number because the line was busy or the receiving party did not answer when you tried to send the document. Wait for the fax to automatically redial the number. If you want to cancel automatic redialing, press [Stop] (see page 24). BUSY/NO SIGNAL Cause The telephone number you dialed is busy. The fax number dialed was incorrect. The other party's fax machine is not working. Action Try sending the document at a later time. Check the fax number and dial again. Contact the other party and have them check their fax machine. 62 Troubleshooting