Canon PIXMA MP160 User's Guide - Page 90
Cannot See The Display On The LCD/LED
View all Canon PIXMA MP160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
E, 1, 4 Message E, 1, 5 E, 1, 6 E, 1, 9 E, 2, x E, 3, x E, 4, x Action The FINE Cartridge may not be the compatible with this machine. Install the appropriate FINE Cartridge. If lines are misaligned or the resulting output is not satisfactory, carry out the FINE Cartridge Alignment. FINE Cartridge errors have occurred. Replace the FINE Cartridge. This FINE Cartridge may have previously been used, or the ink may have run out. The function for detecting the remaining ink level will be disabled since the remaining ink level cannot be correctly detected. If you want to continue printing without this function, press [Black] or [Color]. Canon recommends to use new genuine Canon Cartridges in order to obtain optimum qualities. The size of the document cannot be correctly detected or the document is too small when the Fit-to-Page copying is selected. Make sure the document meets the requirements and correctly loaded on the Platen Glass. Then reload the document and press [Black] or [Color]. See "Setting Documents" on page 15. An error requiring servicing might have occurred. Turn OFF the machine, and unplug the power cord of the machine from the power supply. After a while, plug the power cord of the machine back in and turn ON the machine. If the same error occurs, contact a Canon service representative. Cannot See The Display On The LCD/LED Cause The Machine is not turned ON. The LCD/LED may be in the Power Saver mode. Action You have not pressed [ON/OFF]. The machine will power ON and the LCD/LED will display a message when you connect the power cord and press [ON/OFF]. Press any button on the Operation Panel except for [ON/OFF] to restore the display. 88 Troubleshooting Chapter 10